Magnesium Zinc Rare Earth Alloy Round Billets ZE10 ZE20 ZE90 ZE41
Product Details:
Place of Origin: | Hunan,China |
Brand Name: | HB |
Certification: | ISO |
Model Number: | ZE41 |
Payment & Shipping Terms:
Minimum Order Quantity: | 100 kgs |
---|---|
Price: | depends on your order quantity |
Packaging Details: | in case on pallet |
Delivery Time: | 7 days |
Payment Terms: | L/C, D/A, D/P, T/T, Western Union, MoneyGram, Paypal |
Supply Ability: | 1000 mt per month |
Detail Information |
|||
Mg Alloy: | ZE41 ZE10 ZE20 ZE90 | Rare Earth: | Gd, Zr, Er , Zn |
---|---|---|---|
Shape: | Round Bar, Billet , Slab, Plate | Surface: | Silver |
High Light: | Magnesium Zinc Rare Earth Alloy,Rare Earth Alloy Round Billet,Extrude Rare Earth Alloy |
Product Description
Cast or Extrude Magnesium Zinc Rare earth alloy round Billet ZE10 ZE20 ZE90 ZE41
with high strength and performance
Type/Chemicals | Mg | Al | Zn | Mn | Re |
(max) | (max) | ||||
ZE10 | Balance | - | 1.0-1.5% | - | 0.12-0.22% |
ZE20 | Balance | 0.02% | 1.8-2.4% | 0.5-0.9% | 0.1-0.6% |
ZE90 | Balance | 0.0001% | 8.5-9.0% | 0.01% |
0.45-0.5% |
Customized alloys are available.
Lightweight is an important trend in the development of aerospace materials. The advantages of reducing the mass of the fuselage and various parts are obvious: it can reduce fuel consumption, increase load, extend aircraft flight time, and reduce flight costs. The data shows that for every 1 pound of aerospace material reduction, the cost of commercial aircraft can be reduced by 300 dollars; fighter jets can be reduced by 3,000 dollars; and spacecraft can be reduced by 30,000 dollars. This shows that the lightweight of aerospace materials has an important impact on the cost of spacecraft. In addition, while saving costs, the reduced mass of high-speed aircraft can also greatly reduce inertia and improve flight performance. The density of magnesium is 1.74 g/cm3. Adding some alloying elements to magnesium to form magnesium alloy is still the lightest among many aerospace metal materials. It is only equivalent to the density of engineering plastics, but its strength and stiffness are much higher than engineering plastics. Therefore, if magnesium alloys can be widely used in aerospace, it will bring huge weight reduction benefits and cost savings.
Company Brief Introduction:
China Hunan High Broad New Material was founded in 2006, focus on the business in advanced new material and service. Including: design, installation, material , engineering, maintenance and technical support.
Our sales office located in Changsha, Hunan province, plant located in Hunan,Shanxi, Henan,Guizhou province.Our business scope including : Cathodic protection products for fresh water and marine anti-corrosion products such as magnesium anodes,Aluminum anodes ,Zinc anodes etc.;Master alloy for aerospace ; Aluminum alloy , Magnesium investment castings industry; Magnesium alloy profile :Extrusion/hot rolled billet, plates,bars etc .for various civil & military industry,such as grade AZ31B,AM80,WE43,ZK60 etc.; high wear-resistance & hardness ceramic products for sandblasting nozzle & bulletproof plate for armor vest, armor vehicle.
Along with strong economic development in China, we expand our business very well, Product capacity is over 5000mt per year.Turnover reach to USD20,000,000.00 per year.
Our Products are widely accepted and recognized by clients worldwide including Europe, North America, East Asia, Middle east etc..
Our R&D department have strong technical design capacity. We closely cooperated with colleges and universities, supply the service for various companies in China and overseas.
Believe we can be your long term and reliable supplier .
Magnesium has good machinability, which means good casting properties. Compared with other materials, its manufacturing cost is very low, as shown in Table 4. It is worth noting that although the price per kilogram of magnesium ingot is a little more expensive than that of aluminum and iron, its finished product price per unit volume is almost the same.
The physicochemical properties of magnesium make it more suitable than aluminum for die casting large components. The latent heat of fusion per unit volume of magnesium is only 2/3 of that of aluminum, the specific heat is only 3/4 of that of aluminum, and it has very low iron solubility. These properties allow magnesium die castings to achieve almost the same production cost per kilogram as aluminum. If the highly productive HOT RUNNER technology (such as the latest achievement of THIXOMAT) is applied, the production cost of magnesium die-cast parts is much lower than that of aluminum.
Contact me for catalogs:
Ms.Vivian Jiang
-----------------------------------------------
China Hunan High Broad New Material Co.Ltd.
70 Chezhan North Road,Changsha, China 410100
Tel:+86-731-85717705 Fax:+86-731-85716569
Mobile/Whatsapp: +86-139-7488-3816
Email: vivian@hbnewmaterial.com, metal@vip.163.com
Skype: vivian.jjy